GORGEOUS CERAMIC’s ceramic heating elements for soldering stations heat from room temperature to operating temperature in approximately 18 seconds, helping you achieve significantly higher efficiency. With a maximum temperature of 750°F (approximately 400°C), they meet the requirements of most soldering applications.
They offer a wider power output range, providing a stable heat output of 60W–90W, and precise temperature control makes them suitable for a variety of brazing tasks.
Our products are specially optimized for the Milwaukee series of soldering stations for easy and quick installation.
Material Properties of Ceramic Heating Elements for Wireless Soldering Stations
|
Thing |
Conditions de test |
Unité |
Standard |
|
Couleur |
|
|
white |
|
Densité |
|
g/cm³ |
3.7 |
|
Water Absorption Rate |
|
% |
0 |
|
Taille moyenne des grains |
|
micrometer |
3~5 |
|
Dureté |
Load 4.9N 4.9N |
moyenne générale |
≥15 |
|
Résistance à la flexion |
|
MPa |
≥274 |
|
Coefficient of Linear Expansion |
20~500°C |
1×10-6mm/°C |
6.5~7.5 |
|
20~800°C |
6.5~8.0 |
||
|
Conductivité thermique |
20°C |
W/(m·K) |
≥20.9 |
|
Chaleur spécifique |
|
kJ/(kg·K) |
≥0.8 |
|
Insulation Strength |
|
kV/mm |
≥12 |
|
Résistivité volumique |
20°C |
Ω·cm |
≥1014 |
|
300°C |
≥1011 |
||
|
500°C |
≥109 |
||
|
constante diélectrique |
1 MHz |
|
9~10 |
|
Dielectric Loss Tangent |
1 MHz |
|
≤3×10-4 |
|
Rugosité de surface |
|
μm |
0.3~0.8 |
Electrical Parameters of Ceramic Heating Elements
|
Heater Name |
Ceramic heating element for Milwaukee soldering iron |
|
Operating Voltage |
12V |
|
Power |
60W~90W |
|
Taille |
Length 60mm * Diameter 3.8mm |
|
Lead |
Four nickel wires |
|
Température de fonctionnement |
400~500°C |
|
insulating Sleeve |
According to customer needs |
Application
Electronic circuit soldering, component soldering, home appliance repair, DIY projects, etc.Compatible with Milwaukee series soldering stations.
