Chốt gốm Alumina/Chốt gốm

Tài liệu sản phẩm


Alumina Ceramic Pin , Al2O3

∗ Specifications and sizes are not uniform, other specifications and sizes can be customized according to your needs.

Alumina pins được làm bằng nhôm oxit chất lượng cao and have good mechanical properties, high hardness, high density, and wear resistance, making them widely used in various industrial scenarios. The ceramic pins we produce have excellent wear resistance, with a hardness between 15-19 GPa, and are suitable for various wear-resistant processing applications.

The wear rate of ceramic pins is very low. We have advanced surface treatment technology to perform laser surface modification on the product and modify the microstructure of the ceramic surface to further increase its wear resistance; if there is a higher demand, we can also provide You use chemical vapor deposition (CVD) and physical vapor deposition (PVD) to deposit a super-hard coating on the surface of the product, which greatly improves the wear resistance and service life of the product.

In some cases, ceramic pins need to work in high-temperature environments. Our products can still withstand high temperatures of 1600°C, and can even be briefly exposed to extreme temperatures of 1750°C in some special reducing atmospheres. Ceramic pins also have excellent high-temperature stability and are not easily affected by thermal expansion and deformation. Using our products, you do not have to worry about expansion, deformation or degradation of ceramic materials at high temperatures.

If you have strict requirements on product quality and want the price to be competitive enough, please choose us! The following are the parameters of our typical alumina ceramic pins for your reference when purchasing.

Tham số

Đơn vị

99% alumina ceramic pin

99.9% alumina ceramic pin

Độ tinh khiết

%

99

99.9

Tỉ trọng

g/cm³

3.75

3.90

Độ cứng Vickers

Điểm trung bình

15-17

18-20

Độ bền uốn

MPa

300-350

400-450

Sức mạnh nén

MPa

2000-2500

2500-3000

Mô đun đàn hồi

Điểm trung bình

300-350

370-400

Độ bền gãy

MPa·m^0,5

3-4

4-5

Độ dẫn nhiệt

W/m·K

25-30

28-32

Hệ số giãn nở nhiệt

10^-6/K

7.5-8.0

7.8-8.2

Nhiệt độ hoạt động tối đa

°C

1600

1700

Độ bền điện môi

kV/mm

10-15

15-20

Hằng số điện môi

@1MHz

9-10

9-10

Tỷ lệ hao mòn

mm³/Nm

10-5

10-6

Lưu ý: Các thông số trên được tổng hợp từ kinh nghiệm sản xuất. Dữ liệu được đo lường trong một số điều kiện nhất định. Các điều kiện khác nhau có thể khác nhau đôi chút và chỉ mang tính chất tham khảo khi mua hàng.

Các lĩnh vực ứng dụng

Brazing and electronic manufacturing: Ceramic pins can be used to position and secure electronic components in high-temperature applications. They are well suited for use in electronic manufacturing due to their good heat resistance and insulation properties.

High-temperature stoves and heaters: It can be used as a support or fixed element for high-temperature stoves or heaters. It can be exposed to high temperature environments for a long time and is not easily deformed.

Ngành công nghiệp bán dẫn: used as insulators, positioning pins and other precision components in the semiconductor industry.

Tại sao chọn chúng tôi

Chúng tôi có nhà máy sản xuất gốm sứ tiên tiến chuyên nghiệp với 15 năm kinh nghiệm chuyên môn và nhiều kết quả nghiên cứu kỹ thuật trong sản xuất gốm sứ tiên tiến.

Chúng tôi chỉ sản xuất các sản phẩm chất lượng cao và sản xuất nồi nấu nhôm trong xưởng sản xuất sạch bụi cấp độ hàng triệu. Chúng tôi lựa chọn nguyên liệu thô và thiết bị tốt nhất để đảm bảo hiệu suất của các sản phẩm gốm sứ tiếp theo.

Trong quá trình đúc, chúng tôi sử dụng nhiều loại thiết bị tiên tiến, chẳng hạn như máy ép phun, máy ép đẳng tĩnh (CIP), máy ép khuôn nóng, v.v. Những thiết bị này cùng với đội ngũ nhân viên chuyên nghiệp của chúng tôi đảm bảo chất lượng sản phẩm gốm alumina.

Thiêu kết là một bước rất quan trọng trong quy trình sản xuất gốm sứ. Chúng tôi sử dụng lò thiêu kết nhanh (RAPID) để đảm bảo chất lượng và rút ngắn đáng kể chu kỳ thiêu kết gốm sứ. Ngoài ra, chúng tôi còn có lò thiêu kết vi sóng, lò ép đẳng tĩnh nóng (HIP) và các thiết bị khác để thiêu kết các loại gốm sứ alumina khác nhau. Đội ngũ chuyên gia của chúng tôi kiểm soát chặt chẽ và chính xác thời gian và nhiệt độ thiêu kết gốm sứ để nâng cao hơn nữa hiệu suất của gốm sứ alumina.

We conduct strict product inspection on the alumina ceramic plug products we produce. For high-precision ceramic parts, we achieve the smallest and most reasonable tolerances;

Đội ngũ R&D giàu kinh nghiệm, am hiểu chuyên môn, luôn sẵn sàng phục vụ quý khách mọi lúc. Chúng tôi có uy tín tốt trong và ngoài nước, được nhiều đối tác đánh giá cao.

Bưu kiện

Chúng tôi đóng gói cẩn thận từng sản phẩm để tránh hàng hóa bị hư hỏng trong quá trình vận chuyển. Chúng tôi đảm bảo rằng alumina ceramic pins được cung cấp cho bạn có chất lượng cao và đầy đủ.