Zirconia Sheet，Zirconia Ceramic Sheet
Zirconia sheet is a high-performance ceramic material made of zirconium oxide (ZrO2). It has the characteristics of high hardness, high strength, high temperature resistance, acid and alkali corrosion resistance and good biocompatibility.
Feel free to contact 아주 멋진! Our team will customize different sizes for you according to your needs. In addition to Zirconia Sheet, we can also provide you with advanced ceramics such as zirconia substrates.
Zirconia Sheet Toughening
Our zirconium oxide sheets can be doped with other compounds to increase toughness. The most commonly used toughening techniques are doping with rare earth oxides and composite materials.
Doping with rare earth elements: The method we often use is doping with yttrium oxide to obtain partially stabilized zirconia (PSZ) and fully stabilized zirconia (FSZ), which can greatly improve the toughness of zirconia sheets.
Composite materials: The technology we most commonly use is to compound zirconium oxide with alumina or silicon carbide to obtain zirconium oxide toughened alumina (ZTA), which will greatly improve the material toughness and fracture resistance of the ceramic!
|
목 |
Zirconia toughened alumina |
Zirconia Stabilized Zirconia |
Magnesia partially stabilized zirconium oxide |
Calcium Oxide Partially Stabilized Zirconia |
|
색상 |
하얀색 |
하얀색 |
하얀색 |
Yellow |
|
Density(g/m³) |
4.1-4.38 |
5.87 |
5.7 |
5.6 |
|
경도(GPa) |
14.5-15 |
11.8 |
12.5 |
12 |
|
압축강도(MPa) |
2350 |
2000 |
2100 |
2200 |
|
굽힘 강도（엠파） |
700 |
900 |
850 |
900 |
|
파괴인성（MPa·m1/2） |
5-7 |
6-8 |
8-15 |
7-8 |
|
Specific surface area（m2/g） |
6-10 |
– |
– |
– |
|
Young’s modulus（학점） |
310 |
200 |
200 |
210 |
|
푸아송 비 |
0.26 |
– |
– |
– |
|
Melting point（섭씨） |
>2600 |
– |
– |
– |
|
최대 작동 온도（섭씨） |
1650 |
1000 |
1000 |
1200 |
|
열전도도（W/m·K）（25℃） |
20-21 |
2-3 |
2.2 |
2.5 |
|
열팽창계수 （×10-6/℃） |
8-8.1 |
10-10.5 |
10 |
10.5 |
|
비열（J/kg·K） |
– |
– |
400 |
450 |
|
열충격 저항성（섭씨） |
325 |
– |
350 |
300 |
|
유전율（1MHz） |
– |
28 |
28 |
27 |
|
Dielectric loss（1MHz） |
– |
10×10-4 |
10×10-4 |
9×10-4 |
|
Volume resistance（Ω·cm）（25℃） |
1014 |
>1012 |
>1012 |
>1012 |
Performance Parameters of Zirconia Sheets
Mechanical properties: Our zirconium oxide sheets have a compressive strength of more than 2000MPa and are more ductile than ordinary ceramics, which can help you overcome the difficulties encountered in high-intensity environments.
Thermal properties: Our zirconia sheets have extremely high heat resistance and can withstand high temperatures of 1600°C. The mechanical and chemical properties remain stable at high temperatures, and the service life is longer. Zirconia sheets have low thermal conductivity and can also be used for thermal insulation applications. Our superior zirconia ceramic sheets are your best choice!
Electrical properties: Zirconia sheets have excellent electrical insulation properties and can be used for LED substrates, sensor substrates, etc. They are very superior ceramic materials.
|
Items |
단위 |
지르코니아 |
|
밀도 |
g/cm³ |
5.6 ~ 6 |
|
물 흡수 |
% |
0 |
|
Young’s modulus |
Gpa |
200 ~ 210 |
|
Sintering temperature |
섭씨 |
1650 |
|
푸아송 비 |
/ |
0.3 |
|
열팽창계수 |
1×10-6/℃ |
10.5 |
|
경도 |
학점 |
13 |
|
굽힘 강도 |
엠파 |
＞11000 |
|
압축 강도 |
엠파 |
2000 |
|
굽힘 강도 |
엠파 |
1200 |
|
파괴인성 |
Mpam½ |
6-8 |
|
최대 작동 온도 |
섭씨 |
1600 |
|
유전율 |
1MHz.25℃ |
25 ~ 30 |
Zirconia Sheet Related Processes
조형: Slurry injection molding, isostatic pressing.
표면 거칠기: There are a variety of surface treatments for you to choose.
- Ra0.2μm: The surface finish is optimal, very suitable for your high finish and low friction applications, such as high-precision electronic substrates.
- Ra≤0.80μm: It adopts cold rolling treatment, and the surface finish is moderate. You can use it in general electronic machinery fields.
- Ra≤1.20μm: Cold rolled and ground, with a certain degree of smoothness, but the surface finish is not high.
- Ra≤1.60μm: Cold rolled pickling treatment, matte surface, suitable for applications with low requirements for surface reflection.
Processing accuracy: We can achieve a processing accuracy of ±0.001mm for high-precision zirconia sheets and a tolerance of ±0.02mm for non-precision products, ensuring that your needs are met.
Application of Zirconia Sheets
Electronic component substrates
항공우주
Medical equipment
Chemical processing equipment
Textile industry
Why choose us?
We have more than 15 years of production experience and technical support, and can customize high-quality zirconia plates for you!
We carefully package your products to prevent any accidents during transportation.
We have a complete after-sales system. If your product is damaged during transportation, we will compensate you. If your product has serious quality problems, we will also compensate you!
If you need high-quality zirconium oxide sheets, please contact us now!
