Alumina Ceramic Pin , Al2O3
∗ Specifications and sizes are not uniform, other specifications and sizes can be customized according to your needs.
Alumina pins ~로 만들어졌다 고품질 알루미나 and have good mechanical properties, high hardness, high density, and wear resistance, making them widely used in various industrial scenarios. The ceramic pins we produce have excellent wear resistance, with a hardness between 15-19 GPa, and are suitable for various wear-resistant processing applications.
The wear rate of ceramic pins is very low. We have advanced surface treatment technology to perform laser surface modification on the product and modify the microstructure of the ceramic surface to further increase its wear resistance; if there is a higher demand, we can also provide You use chemical vapor deposition (CVD) and physical vapor deposition (PVD) to deposit a super-hard coating on the surface of the product, which greatly improves the wear resistance and service life of the product.
In some cases, ceramic pins need to work in high-temperature environments. Our products can still withstand high temperatures of 1600°C, and can even be briefly exposed to extreme temperatures of 1750°C in some special reducing atmospheres. Ceramic pins also have excellent high-temperature stability and are not easily affected by thermal expansion and deformation. Using our products, you do not have to worry about expansion, deformation or degradation of ceramic materials at high temperatures.
If you have strict requirements on product quality and want the price to be competitive enough, please choose us! The following are the parameters of our typical alumina ceramic pins for your reference when purchasing.
매개변수 |
단위 |
99% alumina ceramic pin |
99.9% alumina ceramic pin |
청정 |
% |
99 |
99.9 |
밀도 |
g/cm³ |
3.75 |
3.90 |
비커스 경도 |
학점 |
15-17 |
18-20 |
굽힘 강도 |
엠파 |
300-350 |
400-450 |
압축 강도 |
엠파 |
2000-2500 |
2500-3000 |
탄성계수 |
학점 |
300-350 |
370-400 |
파괴인성 |
MPa·m^0.5 |
3-4 |
4-5 |
열전도도 |
W/m·K |
25-30 |
28-32 |
열팽창 계수 |
10^-6/K |
7.5-8.0 |
7.8-8.2 |
최대 작동 온도 |
°C |
1600 |
1700 |
유전 강도 |
kV/mm |
10-15 |
15-20 |
유전율 |
@1MHz |
9-10 |
9-10 |
마모율 |
mm³/Nm |
10-5 |
10-6 |
Disclaimer: The above parameters are summarized from production experience. The data are measured under certain conditions. Different conditions may be slightly different and are for purchase reference only.
적용 분야
Brazing and electronic manufacturing: Ceramic pins can be used to position and secure electronic components in high-temperature applications. They are well suited for use in electronic manufacturing due to their good heat resistance and insulation properties.
High-temperature stoves and heaters: It can be used as a support or fixed element for high-temperature stoves or heaters. It can be exposed to high temperature environments for a long time and is not easily deformed.
Semiconductor industry: used as insulators, positioning pins and other precision components in the semiconductor industry.
왜 우리를 선택해야 하나요?
저희는 15년 이상의 전문적 경험과 첨단 세라믹 생산 분야에서 수많은 기술 연구 결과를 보유한 전문적인 첨단 세라믹 생산 공장을 보유하고 있습니다.
저희는 고품질 제품만을 생산하며, 백만 레벨 무진공 작업장에서 알루미나 도가니를 생산합니다. 또한, 후속 세라믹의 성능을 보장하기 위해 최고의 원자재와 장비를 엄선합니다.
성형 공정에는 사출 성형기, 정수압 성형기(CIP), 열간 프레스 성형기 등 다양한 첨단 장비를 사용합니다. 이러한 장비와 전문 인력의 운영으로 알루미나 세라믹 제품의 품질이 보장됩니다.
소결은 세라믹 제조 공정에서 매우 중요한 단계입니다. 당사는 급속 소결로(RAPID)를 사용하여 품질을 보장하고 세라믹 소결 주기를 크게 단축합니다. 또한, 다양한 알루미나 세라믹 소결을 위한 마이크로파 소결로, 열간 등방압 가압로(HIP) 및 기타 장비를 보유하고 있습니다. 당사의 전문가들은 세라믹 소결 시간과 온도를 엄격하고 정확하게 관리하여 알루미나 세라믹의 성능을 더욱 향상시킵니다.
We conduct strict product inspection on the alumina ceramic plug products we produce. For high-precision ceramic parts, we achieve the smallest and most reasonable tolerances;
풍부한 전문 지식을 갖춘 R&D 팀이 언제든지 귀사를 위해 대기하고 있습니다. 저희는 국내외에서 좋은 평판을 누리고 있으며, 많은 파트너사로부터 높은 평가를 받고 있습니다.
패키지
운송 중 상품이 손상되지 않도록 각 제품을 꼼꼼하게 포장합니다. alumina ceramic pins 귀하에게 전달되는 제품은 고품질이며 완벽합니다.